I get commissions for purchases made through links in this post.
Replacing a bathtub doesn’t have to mean a massive, stressful project. With the right tools and a bit of patience, it’s something that most homeowners can do themselves. Whether your current bathtub is old, cracked, or just no longer your style, installing a new one can give your bathroom a fresh, updated look. Here’s a step-by-step guide to help you replace your bathtub without the need for a plumber.
1. Get Ready by Clearing the Area
Before anything else, make sure you clear the space around your bathtub. This includes moving any bathroom rugs, furniture, and toiletries. You’ll want plenty of room to work safely and efficiently, especially when maneuvering tools and large materials.
Next, remove any cabinets or fixtures that could obstruct your work area, like towel racks or built-in shelves. It’s also a good idea to cover the floor and nearby surfaces with a protective cloth or drop cloth to prevent damage from debris or water splashes.
2. Turn Off the Water Supply
Before you get into removing your bathtub, shut off the water supply to avoid any unwanted splashes. You can do this by turning off the main water valve for your home. Once the water is off, go ahead and open the faucet to release any water left in the pipes. This ensures no more water is running while you work.
3. Disconnect the Plumbing
Now, it’s time to disconnect the plumbing that connects your bathtub to the water supply. Start by removing the drain stopper, overflow plate, and supply lines. You’ll need a wrench to loosen the faucet assembly and disconnect the drain pipes. Take your time here to avoid damaging the pipes, and be mindful of any old or brittle pipes that may need replacing.
If you’re unfamiliar with plumbing work, consider watching some tutorials, but most people can handle this part with basic tools. If you’re unsure, you might want to reach out to a friend who has experience or hire a plumber just for this step.
4. Remove the Tub Surround or Tiles
If your bathtub is surrounded by tiles or a tub surround, you’ll need to remove that first. Use a hammer and pry bar to carefully take out the tiles or detach the surround. Work slowly and methodically to avoid damaging the surrounding walls. If the tiles are glued down, you may need to use a utility knife to cut through any adhesive before prying them off.
Once the surround or tiles are gone, take a moment to inspect the wall for any water damage or mold. If you find any, it’s best to address these issues before moving on.
5. Remove the Old Bathtub
With the plumbing and surrounds removed, it’s time to take out the old bathtub. Be prepared, as bathtubs are often heavy and cumbersome. If possible, get help from a friend to lift and maneuver the tub out of place. You may need to cut through the caulk or sealant along the edges to loosen the tub.
When moving the tub out, be mindful of doorways and narrow spaces that could make it difficult to carry the tub through. A good tip is to tilt the tub to fit it through tight spaces and take it out at an angle.
6. Prepare the Area for the New Tub
With the old tub out, it’s time to inspect the surrounding area. Take a look at the floor and walls to make sure there’s no lingering damage or mold. If necessary, replace or repair the floor, especially the subfloor if it shows signs of water damage.
Give the space a thorough cleaning to remove any dust, debris, or leftover materials. Also, check the plumbing to ensure everything is in good condition and ready for the new tub.
7. Measure the Space for the New Tub
Before you buy a new bathtub, take precise measurements of the space where the old tub was. You’ll need to measure the length, width, and depth of the area to ensure the new tub will fit properly. Double-check these measurements, including any space needed for plumbing and fixtures.
Choose a tub that matches both your style and the size of your bathroom. There are many options out there, so consider the material, style, and any additional features like jets or built-in showers.
8. Install the New Bathtub
Once you have your new bathtub, it’s time to install it. Start by placing the tub into position, making sure it aligns with the drain and supply lines. You’ll need to connect the plumbing, making sure all the pipes are properly sealed and tightened to prevent leaks.
If your new tub requires any additional parts, like a drain, faucet, or overflow pipe, install those as per the manufacturer’s instructions. Double-check the connections before moving on to the next step.
9. Reinstall Surround or Tile
With the new tub in place, it’s time to reinstall the tub surround or tiles. If you’re using tiles, start by applying a layer of adhesive to the walls and setting the tiles in place. You may need to use grout to fill in the spaces between the tiles once they’re set.
If you’re using a pre-made surround, follow the manufacturer’s instructions for installation. Be sure to use waterproof sealant around the edges to keep water from seeping behind the tub.
10. Finish with Caulking and Cleanup
Once the tub and surround are securely in place, finish the installation by applying a bead of caulk around the edges of the tub. This will create a water-tight seal and prevent any water from leaking into the surrounding walls or floor.
Finally, clean up the area, remove any protective covers, and dispose of any debris. Turn the water back on and test the tub to make sure everything is functioning properly.
Conclusion
Replacing a bathtub on your own is a manageable task if you’re prepared. By taking the time to clear the area, disconnect the plumbing, and carefully remove the old tub, you can install a new one with ease. Whether you’re looking to update your bathroom’s look or replace a damaged tub, following these steps will help you achieve a smooth, successful bathtub replacement without calling in a professional. With the right tools, some patience, and a bit of elbow grease, you’ll have a fresh, new bathtub in no time!